3
2
1


 

本试验机适用于金属产品中进行的2000KN拉伸、压缩、弯曲、剪切等试验,也可用于塑料、混凝土、水泥等非金属材料同类试验的检测:本机采用油缸下置液压钳口,试验空间可调整,全数字闭环控制系统,加载速度可自由设定。

This testing machine applies to metal products performing the mechanical tests of stretching. Compressing, bending, cutting, etc within the range of 2000KN and does the tests of non-metal materials of this kinds , such as plastic, concrete, cement and so on .

This machine use of hydraulic jaw under hydrocylinder, test space can be adjusted, full digital close loop control system, freely sets loading speed.

主要技术参数:

1、 型号规格:QJWE300、QJWE600、QJWE1000、QJWE2000

2、 示值精度: ±0.5%

3、 相对分辨率:≤0.5 %

4、 拉伸空间:480、600、610mm

5、 压缩空间:480、500、510mm

6、 圆试样夹持直径:10-32mm、13-40mm、20-60mm、25-70mm

7、 扁试样夹持直径:0-15mm、0-30mm、0-40mm

8、 活塞行程:150、170mm

9、 弯曲支点最大距离:100-450mm、100-500mm、100-500mm

10、         剪切试样直径:10mm、20mm、30mm

11、         体积(长*宽*高):800*520*1850mm、830*550*2060mm或950*650*2220mm

12、         电机功率phase:1.5KW、2.1KW,3相

13、         机台重量:约1650kg或2500kg

 

Main Technical Parameter

1、 Types and specifications:QJWE300、QJWE600、QJWE1000、QJWE2000

2、 Indicating accuracy:±0.5%

3、 Relative resolution:≤0.5 %

4、 Stretching space:480、600、610mm

5、 Compressing space:480、500、510mm

6、 Diameter of holding round specimen :10-32mm、13-40mm、20-60mm、25-70mm

7、 Diameter of holding flat plate specimen:0-15mm、0-30mm、0-40mm

8、 Piston stroke :150、170mm

9、 Maximum distance of bending pivot point:100-450mm、100-500mm、100-500mm

10、         Diametr of shear specimen:10mm、20mm、30mm

11、         Volume(length*width*height):800*520*1850mm、830*550*2060mm or 950*650*2220mm

12、         Motor power ,phase::1.5KW、2.1KW,3 three phase

13、         Machine weight:about 1650kg or 2500kg